Globact 48P 22T 23T 24T 25T 26T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush
Couldn't load pickup availability
Description
【Work Smoothly】Good machining made less rough and less noise than other pinions that make them roll smoothly.Durable metal construction for long-lasting performance【Pitch & Teeth】48P is the pitch of each tooth on the pinion gear and the 22T 23T 24T 25T 26T is the number of teeth on the pinion gear. Hole distance:3.175mm.Suitable motor shaft diameter: 3.175mm.Please make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh
【Hardened】48P pinion gear set is of hardened metal construction. Last longer life
【Free Style】The speed depends on your gear ration. We provide five different teeth pinion gear to make you more choice in gear ration
【5pcs】The package included 48p 22T 23T 24T 25T 26T pinion gear and a hardened hex key
Share
Product Details
Specifications:
Material: Metal
Teeth: 22T 23T 24T 25T 26T
Height: 9mm
Tip diameter
22T: 12.72mm
23T: 13.25mm
24T: 13.78mm
25T: 14.31mm
26T: 14.84mm
Suitable shaft diameter: 3.175mm
Package information:
Package size: 8.5 * 4.5 * 3cm / 3.3 * 1.8 * 1.2in
Package weight: 10g
Polybag package
Package list:
1 * 48P 22T Pinion Motor Gear
1 * 48P 23T Pinion Motor Gear
1 * 48P 24T Pinion Motor Gear
1 * 48P 25T Pinion Motor Gear
1 * 48P 26T Pinion Motor Gear
5 X Grub Screws
1 X Hex Key
Note:
1.【48P】is the pitch of each tooth on the pinion gear and the 22T 23T 24T 25T 26T is the number of teeth on the pinion gear.
You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.
2.【3.175mm】The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter.
3.Make sure you thread lock the grub screw. They are hard to find when they fall out.
4.Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth).
5.Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC.
6.How to install the pinion gear:
You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft.
When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small. It should be about the width of a piece of paper.